Preferred Knots
InvisaSwivel
Clinch Knot Instructions
- Pass the line through the eye of the swivel leaving several inches of line to work with.
- Double back. Twist four to five turns around the line.
- Pass the end of the line through the first loop near the eye. To tighten, pull on swivel and line simultaneously.
- Pull only as hard as the swivel is rated for.
- TIP: There are groves near the eye of the swivel. Make sure the line is seated into the grooves so the line comes straight off the swivel.
Knot2Kinky Wire
Perfection Loop
![](http://cdn.shopify.com/s/files/1/0043/3907/3091/files/Perfectionloop-knotdb_large.jpg?v=1537465871)
Clinch Knot Instructions
- Pass the line through the eye of the swivel leaving several inches of line to work with.
- Double back. Twist four to five turns around the line.
- Pass the end of the line through the first loop near the eye. To tighten, pull on swivel and line simultaneously.
- Pull only as hard as the swivel is rated for.
- TIP: There are groves near the eye of the swivel. Make sure the line is seated into the grooves so the line comes straight off the swivel.
Albright Knot Instructions
- Purpose: To tie a mono/Fluoro line directly to Knot2Kinky wire.
- Form a loop in the Knot2Kinky wire. Pass the end of the other line through the loop and wrap it neatly around itself and the two lines of the loop ten times.
- Then pass the end back through the loop the same way it entered.
- Lubricate, pull the knot tight and clip the tag ends.